welding position meaning in Chinese
焊接部位
焊接位置
焊接姿势
Examples
- Welding position defined by means of angles of slope and rotation
用斜角和旋转角定义的焊接位置 - Welding position : if the configuration collocation of weld is symmetry and the welding sequence is reasonable , the longitudinal contraction and transverse lateral contraction deformation are usually produced , incontrast , the bending deformation is usually produced
焊接位置：如果焊缝在结构布置对称，焊接顺序合理时，则主要产生纵向收缩和横向收缩变形，反之，则要发生弯曲变形。 - Weld positioning under load without installation , seam thickness of the seam thickness of not less than two - thirds of the design , not to exceed 8 mm , should not be less than 25 mm in length weld , located in welds inside
安装定位焊缝不需承受荷载时,焊缝厚度不少于设计焊缝厚度的2 / 3 ,且不大于8 ? ,焊缝长度不宜小于25 ? ,位置应在焊道内.安装焊缝全数外观检查,主要的焊缝应按设计要求用超声波探伤检查内在质量.上述检查均需做出记录 - The welding position can be detected accurately through processing the image of arc area collected by the vision sensor ccd ( charge coupled device ) , by the system of image collection and computer - ware , we can recognize the position of the welding line exactly , count out the warp between moving track of robot and the welding line . so we can control the robot ' s act real - timely , the seam tracking accuracy is enhanced efficiently
重点论述焊缝图像分割和边缘提取的理论方法，焊缝图像由面阵ccd摄像系统摄取，通过图像采集系统和计算机软件，对检测到的弧焊区图像进行处理来准确地识别焊缝位置，计算机器人的运动轨迹和实际焊缝之间的偏差，据此控制机器人运动进行实时跟踪，从而有效地提高焊缝跟踪精度。